Fläkt Woods Group Global - Fan solution for Marine and Offshore Applications

GT Centrimaster – belt driven These single inlet, centrifugal fan series consists of centrifugal fans, belt driven, available with two types of impeller: Impeller with forward curved blades made of galvanized sheet steel. Impeller with backward-curved blades, made of sheet steel and welded, coated with epoxy powder. The fans are also available in a spark-proof version with the inlet cone made of brass.
		GT Centrimaster – direct driven Single inlet centrifugal fans consists of centrifugal fans available with two types of impeller: Impeller with forward-curved blades. Impeller with backward-curved blades made of galvanized sheet steel.
The fans are also available in a spark-proof version with the inlet cone made of brass and also in a smoke extraction version.
Centripal EU A complete range of direct drive or belt-driven centrifugal fans. One casing to suit all orientation arrangements thanks to the octagonal casing design for on-site modifications. The fans are Atex certified and available for spark proof design. Painted, galvanized or stainless steel construction are available as standard protection protect against corrosive environments. Inlet and outlet flanges according to ISO 13351. In addition there are a wide range of ancillaries. These fans are often installed inside AHU’s, mainly for Offshore applications or are used as exhaust fans.		Centripal Eu - Direct Driven Centripal EU - Belt Driven

Axial Fans

JM Aerofoil A wide range of fans, from 5 up to 65 m3/s and 2000 Pa, with 315 up to 1600 mm diameter, in either short cased or long cased variations. Fitted with a die cast aluminium pitch impeller of thin aerofoil section, to offer high performance and to minimise the noise levels. The combination of fully adjustable pitch angles and variation of fan solidity enables a wide range of fan selections to be achieved to match duty requirements with a maximum of running efficiency. Painted, galvanized or stainless steel construction are available as standard protection against corrosive environments.
There are options for both foot and pad mounted motors also, as well as premium efficiency motors to EFF1. Fans are protected by thermostats embedded in the motor windings to ensure that in the event of overheating, power is shut down before damage is done. In addition there are a wide range of ancillaries, suitable for general ventilation cooling and high temperature applications. Type FACD also for installation insida AHU when a high static pressure is not demanded.

Contacts