Buildings|   Industry

Displacement Diffusers

Diffusers for displacement air distribution give quiet installations with both good air comfort and high ventilation efficiency. The system also permits economical and effective air cooling. Fläkt Woods has a large range of displacement air terminal devices with different forms and capacities.

Related documents

 

Floormaster terminal devices are equipped with an air distribution system consisting of a roll-shaped perforated distribution plate with an attached honeycomb sheet in black polycarbonate. This component combination permits uniformly horizontal air distribution through the front panel with a short near zone and a very low noise level.

  • Floormaster DVHA is a semi-cylindrical supply air terminal device developed for displacement ventilation. DVHA is designed for positioning on a wall or floor, with connection to circular ducts.
  • Floormaster DVQA is a quater-cylindrical supply air terminal device developed for displacement ventilation. DVQA is designed for positioning in a corner, with connection to circular ducts.
  • Floormaster DVRA is a cylindrical supply air terminal device developed for displacement ventilation. DVRA is designed for positioning on the floor, with connection to circular ducts.
  • Floormaster DVPA is a flat supply air terminal device developed for displacement ventilation. DVPA is designed for positioning on a wall, or on the floor against a wall, with connection to rectangular ducts.
  • Floormaster DVCA is a flat recessed supply air terminal device developed for displacement ventilation. DVCA is designed to be built in to a wall. Connection of the supply air is effected through a wall duct adapted to the building.
  • Circular displacement diffuser WOZA is suitable for industrial rooms and where is the necessity to supply a large quantity of air flow directly into to the working area.


 

For more information, please contact: