Clear all filters
Product category
Clear selections
Document category
Clear selections
Solutions
Pages

AC INDUSTRIAL

INDUSTRIAL


  • Maintenance free
  • High screening performance
  • Customized heating

View & Configure
  • 1m, 1.5m,2m,2.5m and 3m
  • Air Flow: from 3700 to 23400 m3/h
  • For height up to 6.5m
  • Available with: Electric coil, Water coil, Ambient
  • Heating output: From 9 to 72 kW (electric version)
  • Heating output: From 20 to 180 kW (water version)
  • Horizontal or vertical installation
Go to product

ACTIVENT® SUPPLY AIR DISTRIBUTION SYSTEM

AIR DISTRIBUTION SYSTEMS

Effective mixing properties even with cooled air

  • Simple duct installation, compatible with Veloduct Range
  • Low air velocities in the occupancy zone > draught free
  • High cooling effect with low air flows 

View & Configure
  • Easy to install
  • Low sound level
  • Connection sizes 200 - 500 mm
  • 10 different nozzle sector possibilities
  • Made of hot galvanized steel
  • Available in RAL 9010 and other colours on special order
Go to product

AVS GRILLE

VENTILATION GRILLES

Ventilation grille with horizontal fixed front blades

  • Can be mounted with or without mounting frame
  • Intended for wall mounting

View & Configure
  • AVS - horizontal fixed front blades
  • AVS1 - front blades only without frame
  • AVS-15 - as AVS, but blades at 15° angle
  • AVS1-15 - as AVS1, but blades at 15° angle
  • AVS grilles larger than width W>1500 and/or height H>1000 are available with modular construction.
  • Available also as continuous ribbon.
  • Made of aluminium profiles.
  • Painted in white RAL 9010, other colours available on special order.
  • Mounting frame K is made of hot galvanized steel sheet.
  • Adjusting device S is made of hot galvanized steel sheet. The regulation blades are made of aluminium.
  • Connection box TG for supply and TGE for exhaust air.
Product selection tools
Go to product

CENTRIFLOW 3D® MIX FLOW PLUG FAN

PLUG FANS,CENTRIFUGAL FANS

Our new CentriFlow 3D plug fan is developed to deliver superior performance inside your Air Handling Unit

  • Designed for optimised system efficiency
  • Unique mix flow impeller design

View & Configure
  • Unique mix flow impeller designed for optimised system efficiency.
  • High precision CFD designed hollow aerofoil profiled blades, guarantees consistently high performance.
  • Lowest noise level on inlet and outlet
  • 12 sizes ranging from 250 up to 900 mm in diameter
  • Up to 60.000m³/h and 2.500 Pa
  • Available with PM, AC and EC motor
  • Available in horisontal and vertical models
  • Plug & Play solutions
Product selection tools
Go to product

CVAA JET NOZZLE

JET NOZZLE DIFFUSERS

Jet nozzles for Dirivent system

  • Installation on a duct fitting
  • Available as fixed or adjustable versions

View & Configure
  • Available in two versions: fixed and adjustable.
  • Installation on a duct fitting.
  • One connection size (80 mm).
  • Made of steel sheet.
  • Connection piece is flexible aluminium duct.
Go to product

DEBA KITCHEN EXTRACT FAN

KITCHEN EXTRACT

The Deba is suitable for medium flow rates and medium to high pressures, making it ideally suited for kitchen extract applications as it is able to achieve pressure high enough to overcome the resistance of particulate filters.

  • Can be used with a Variable Speed Drive for high efficiency
  • Can be used as a smoke exhaust fan classified F400, EN 12101-3
  • Maximum continuous operating temperature up to 120ºC

View & Configure
  • 4 sizes: 025,031,040 and 050
  • Volume flow up to 2.7m³/s
  • Total pressures up to 1100Pa
  • AC Motor (230V/1ph or 400V/3ph)
  • Motor protection IP54
  • High efficiency CentriflowPlus Impeller used
  • Casing insulated against sound and condensation
  • Easy to open for cleaning
Go to product

DELBAG® FILTER ELEMENTS INDUSTRIAL

AIR FILTRATION

Air-filter elements with pleated micro-glass-fiber are designed so that the number and the height of the pleats are optimally matched to operational conditions. The correct distance between the pleats is maintained by separators or by the HotMelt pleat technology. The pleats are integrated into various frame materials as folded packages in compact, intrinsically stiff form. The filter elements are used in general ventilation and climate-control systems, and for special applications such as the following: high-temperature filters in surface-finishing processes, oil- and emulsion-mist separation, and high-quality pre-filters in clean-room areas.

View & Configure
Go to product

DRAA JET NOZZLE DIFFUSER

JET NOZZLE DIFFUSERS

Optimized air diffusion with throw lenght up to 36 m

  • Low sound level
  • Wide flow range
  • Adjustable diffusion pattern
  • Installation on flat surface

View & Configure
  • Low sound level.
  • Easy to install and adjust.
  • Installation on flat surface.
  • Six sizes (nozzle sizes 40 - 200 mm).
  • Made of aluminium.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Can also be supplied unpainted or anodized aluminium.
Product selection tools
Go to product

DVCA FLOORMASTER® DISPLACEMENT DIFFUSER

DISLACEMENT DIFFUSERS

Floormaster® system for good indoor air comfort

  • Flat unit
  • Very low sound level
  • Uniform diffusion pattern
  • Short comfort boundaries

View & Configure
  • Low sound level.
  • Easy installation and maintenance.
  • Consist of a visible flat terminal part, a terminal box and a wall duct for flush-mounting in a wall
  • Two sizes.
  • Made of sheet steel.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Outlet for flow measurement.
  • Dismountable front plate.
  • No visual screws.
Go to product

DVPA FLOORMASTER® DISPLACEMENT DIFFUSER

DISLACEMENT DIFFUSERS

Floormaster® system for good indoor air comfort

  • Flat unit
  • Very low sound level
  • Uniformly diffusion pattern (180°)
  • Short comfort boundaries

View & Configure
  • Low sound level.
  • Easy installation and maintenance.
  • Five sizes.
  • Made of sheet steel.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Terminal base and other accessories available on special order.
  • External duct connection (male).
  • Outlet for flow measurement.
  • Dismountable front plate.
  • No visual screws.
Go to product

DVRA FLOORMASTER® DISPLACEMENT DIFFUSER

DISLACEMENT DIFFUSERS

Floormaster® system for good indoor air comfort

  • Round unit
  • Very low sound level
  • Uniformly circular diffusion pattern
  • Short comfort boundaries

View & Configure
  • Low sound level.
  • Easy installation and maintenance.
  • Six connection sizes (125-630 mm).
  • Made of sheet steel.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Terminal base and other accessories available on special order.
  • Internal duct connection (female).
  • Outlet for flow measurement.
  • Dismountable front plate.
  • No visual screws.
Go to product

DYSH NOZZLE DIFFUSER

NOZZLE DIFFUSERS

Easily adjustable nozzles for different diffusion patterns

  • Low sound level
  • Easy installation
  • Adjustable nozzles
  • Bundle code DYSC = DYSH + ATTC

View & Configure
  • Low sound level.
  • Easy to install and adjust.
  • Adjustable air slot and diffusion pattern.
  • Six connection sizes (125-400 mm).
  • Diffuser is made of sheet steel and air nozzles of plastic.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Available with connection box ATTC (bundle code DYSC = DYSH + ATTC).
Product selection tools
Go to product

ECONOVENT PUML

ECONOVENT

Best in class energy recovery offered as a separate wheel to fulfill customer´s expectations.

  • Econovent´s unique technology offers best in class performance  
  • Non-hygroscopic or sorption variants in combination with several foil spacing alternatives, will optimize your project
  • By far the lightest wheel offered in the market enabling safe and efficient installation and maintenance work
  • Eurovent, AHRI, Tüv Süd and ERP compliant

View & Configure
  • The Econovent is the original energy recovery wheel installed over the whole world, saving massive amount of energy for its owner
  • It´s unique mechanical design with thin foil (35/50micron) enables;
    - undisputable quality and longevity
    - market leading efficiency (by enhanced convection heat transfer through more surface)
    - lowest offered pressure drops
    - 30-50% lighter wheel, which not just simplifies installation and maintenance, but also reduces wear on bearings/sealings resulting in increased longevity
  • The Econovent is delivered in non-hygroscopic or sorption execution
  • The sorption variant with its unique coating process provides the highest latent performance in the market
  • For corrosion protection, the Econovent is offered in epoxy- or edge-reinforced treatment
  • Every single Econovent is mechanically pressure tested before dispatch to assure customer satisfaction
  • For project optimization 5 different foil spacings are offered
  • Diameters offered in steps of 1cm between 30cm and 250cm, and 5cm between 250cm and 500cm
  • Econovent is offered in one piece, or in segments
  • Bespoke solutions for the casing, rotor and accessories are available

 

Go to product

EMAS RECTANGULAR FLOW VARIATOR

VARIABLE AIR VOLUME DAMPERS

Accurate real time flow variator with sound attenuator for Demand Control Ventilation.

  • Easy and Quick Selection
  • Setting up values without external equipment
  • Integrated attenuator > No silencer on duct runs
  • Fläkt Woods controller as standard

View & Configure
  • Operating range 1-8 m/s
  • Available in 7 sizes for duct diameters from 100-400 mm
  • Galvanised steel
  • All duct fittings are equipped with a sealing ring made of EPDM rubber
  • Insulated casing
  • Short sound attenuator as standard
Product selection tools
Go to product

EMSD CIRCULAR FLOW VARIATOR

VARIABLE AIR VOLUME DAMPERS

Accurate real time flow variator for Demand Control Ventilation. Nipples for manual measurement.

  • Real time air flow display
  • No additional investment required in commissioning tool

View & Configure
  • Operating range 0.5-8 m/s
  • Available in nine sizes for duct diameters between 100 - 630 mm
  • Insulated casing
  • Galvanised steel
  • All duct fittings are equipped with a sealing ring made of EPDM rubber
  • Integrated orifice plate for air measurement
Product selection tools
Go to product

GPDF EXHAUST AIR VALVE

EXHAUST AIR VALVES

Classic design for all applications

  • Easy installation
  • Easy to adjust

View & Configure
  • Low sound level
  • Easy to install with a spring mounting into a mounting frame
  • Easy to adjust
  • Three connection sizes 100 - 160 mm
  • Made of steel sheet
  • Standard colour RAL 9010. Other colours are available on special order
  • Can be installed on a ceiling or a wall
Product selection tools
Go to product

GT-1 CENTRIFUGAL FANS

CENTRIFUGAL FANS

Direct Driven single inlet centrifugal fan for high efficiency.

  • 7 m3/s and 2000 Pa maximum characteristics
  • Continuous operation of 40Deg C [motor in airstream] or 80Deg C motor out of the airstream

View & Configure
  • Forwards Curved GTLF impellers for small vent systems needing a cost efficient solution
  • Backward-curved GTLB impellers for medium pressure systems needing low noise
  • Backward-curved GTHB impellers for high pressure systems needing low noise
  • GTLF Impeller is dynamically balanced to ISO Standard 1940 – 1973 G 6.3
  • GTLB Impeller is dynamically balanced to ISO Standard 1940 – 1973 G 2.5 (sizes 035–10) or G 6.3 (sizes 025–031)
  • GTHB Impeller is dynamically balanced to ISO Standard 1940 – 1973 G 2.5 (sizes 035–10)
  • Deep inlet cones for improves aerodynamic efficiency and reduced noise levels
Product selection tools
Go to product

HT SMHA HATCH

HT ROOF FANS,HATCH AND WALL HATCH

The SMHA Hatch is a one purchse solution for rooftop smoke extraction offering large air flows, EC certification and easy installation.

  • CE-marked package ready for roof installation
  • Suitable for high air volumes (up to 26 m3/s)
  • Simple and low-cost installation

View & Configure
  • Available in 5 different sizes
  • Airflow : up to 26 m3/s
  • Pressure rises of 600 Pa
  • High temperature version available 400°C / 2 hours
  • CE-marked hatch protecting HT-fan inside the casing
  • 2 linear motors to open the hatch
  • Casing : galvanized as standard, special colors as option
  • Insulated with 70 mm of mineral wool
Go to product

HUS GRAVITATION FLOW GRILLE

TRANSFER AIR GRILLES

Covering grille for fresh and transfer air openings

  • Easy to install
  • Non-adjustable

View & Configure
  • Six sizes from 300x100 to 500x150.
  • Made of hot galvanized sheet steel.
  • Available also in white RAL 9010 on special order.
  • Non-adjustable.
Product selection tools
Go to product

KHDA SUPPLY AIR DIFFUSER

WALL DIFFUSERS

Suitable for large premises

  • Easy to install
  • Adjustable diffusion pattern
  • Adjustable throw direction

View & Configure
  • Suitable for large premises.
  • Adjustable diffusion pattern.
  • Adjustable air jet direction.
  • Five sizes (200-500 mm)
  • Made of sheet steel.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Can be adjusted manually or with electrical actuator.
Product selection tools
Go to product

NSLA SUPPLY DIFFUSER FOR CLEAN ROOMS

CLEAN ROOM DIFFUSERS

Ceiling diffuser for operating theatres

  • Supply air terminal with a laminar flow function intended for installation in the ceiling of an operating theatre
  • Equipped with a HEPA filter for very high efficiency of supply air filtration
  • Very low velocity and stable air flow

View & Configure
  • Low sound level.
  • Easy and quick filter replacement.
  • Filter class H13 as standard and H14 on special request.
  • Three sizes.
  • Made of sheet steel. Stainless steel on special order.
  • Painted in white, RAL 9010. Other colours are available on special order.
  • Available with opening for operating lighting.
  • Available with circular or rectangular connection.
Product selection tools
Go to product

PNAA DISPLACEMENT DIFFUSER

DISLACEMENT DIFFUSERS

Versatile diffuser which can be mounted on floor, ceiling or floor

  • Uniform diffusion pattern
  • High supply air volumes
  • Easy to adjust and measure without removing front panel

View & Configure
  • Low sound level.
  • Easy installation and adjustment.
  • Five circular connection sizes (160-400 mm).
  • Made of galvanized sheet steel.
  • Front plate is painted in white, RAL 9010. Other colours are available on special order.
Go to product

RDKG HEAT RECOVERY UNIT

AIR HANDLING UNIT RESIDENTIAL


  • Up to 73% temperature efficiency
  • Easy to install
  • Service friendly

View & Configure
  • Supply and exhaust air flows between 20-80 l/s
  • Can serve living areas up to 155 m2
  • Filters up to class F7
  • Individually adjustable fans
Go to product

REGOTERM Rotor

REGOTERM,ENERGY RECOVERY

REGOTERM rotor offer high levels of heating and cooling recovery at low pressure drops.

  • Up to 90% in temperature efficiency
  • REGOTERM 270 Premium for optimized ratio between heat recovery and pressure drop

View & Configure
  • Available for eQ prime, eQ Master and eQ Top
  • Non-hygroscopic rotor
Product selection tools
Go to product

RISJ EXTERNAL LOUVRE

AIR INTAKE & EXHAUST AIR LOUVRES

Robust louvre for exhaust air

  • Can be used in all environments

View & Configure
  • Upwards directed louvres and formed especially for exhaust air
  • Sizes from 200 x 200 mm to 1600 x 1200 mm
  • Larger louvres are made of moduls
  • Width and height can be supplied in 50 mm increments
  • Made of hot dip galvanized steel
  • Standard colour is grey RAL 7000
  • Other colours on special order
Go to product

RIV FRESH AIR VALVE

FRESH AIR VALVES

Air valve for small air volumes

  • Flexible product
  • Durable inlet duct
  • Easy installation

View & Configure
  • The valve consists of outer grille, inlet duct, inner grille with regulation device and filter.
  • The RIV valve may be fitted through walls, ventilating panes or behind the radiator
  • Especially designed for fresh air supply where air volumes are small
  • Opening for inlet duct only 80 mm
  • Made of ABS plastic Standard RAL 9010 finish
  • The inlet duct can be shortened to suit wall thickness (50-400 mm)
Product selection tools
Go to product

SABINA - SINGLE BOX

CIRCULAR BOX FANS

The Sabina Circular Duct Fan is a versatile unit offering very low breakout noise levels. It can be installed into ceiling voids due to its compact design.

  • Low noise levels
  • Robust construction
  • Quick installation

View & Configure
  • 125 mm - 500 mm diameter spigot sizes
  • Volume flow up to 0.66m3/s
  • Total pressure up to 510 Pa
  • AC Motor (230V/1ph/50hz)
  • Forward curved impellers
  • Galvanised sheet steel casing
  • Acoustically lined box
  • Horizontal and vertical mounting
Go to product

STOF ROOF EXTRACTION UNIT

ROOF FANS


  • High efficiency fan
  • Low sound level
  • Easy installation & maintenance

View & Configure
  • Available in 8 sizes
  • Airflow up to 4.7 m³/s (16920 m³/h)
  • Static pressures up to 650 Pa
  • Vertical, horizontal and shutter versions available
  • Motorized impeller in accordance with ErP 2015
  • Motor is an external rotor motor inside the airstream
  • AC and EC versions available with speed control
  • Pre-painted galvanized Steel or AL/ZC (Class 4)
  • Insulated casing as option

 

Product selection tools
Go to product

USR GRILLE

VENTILATION GRILLES

Egg crate grille for exhaust air

  • Designed for use as exhaust grille
  • Intended for wall and ceiling mounting
  • Can be mounted with or without connection box

View & Configure
  • USR grilles larger than width W>1200 and/or height H>600 are available with modular construction.
  • Made of aluminium.
  • Painted in white RAL 9010, other colours available on special order.
  • Mounting frame K is made of hot galvanized steel sheet.
  • Adjusting device S is made of hot galvanized steel sheet. The regulation blades are made of aluminium.
  • Connection box TGE for exhaust air.
Product selection tools
Go to product

VELODUCT®

VELODUCT

Veloduct reduces operating costs

View & Configure
Go to product
.pdf
AFE Group Estoc Targe PowerBox Technical Catalogue
Language: English
Status: Current
  • Technical
View | Download | |
.pdf
Car Park Brochure Technical & Sales Catalogue 50Hz 2
Language: English
Status: Current
  • Technical
View | Download | |
.rfa
Car Park Low Profile Jet Fan BIM file
Language: English
Status: Current
Publish date: 2017.05.31
  • BIM File
View | Download | |
.pdf
Centrimaster GT spare parts
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
  • Declaration of manufacture
View | Download | |
.pdf
Centrimaster GX spare parts
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
Chillers Marketing brochure
Language: English
Status: Current
  • Marketing
View | Download | |
.pdf
Estoc Targe PowerBox Technical Catalogue - Woods UK
Language: English
Status: Current
  • Technical
View | Download | |
.pdf
EU Air Handling Unit with SEMCO
Language: English
Status: Current
  • Marketing
View | Download | |
.pdf
EU Econet Heating & Cooling transfer guide
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EUAZ-08 Water trap installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EUAZ-42 adjustable foot installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EUGA Spare parts 2
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
EULC Axial flow fan installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EULC Axial flow fan maintenance
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EULK Spare parts 2
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
EULZ-14 Air distributor installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EULZ-25 Telpher beam installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EUP Filter Spare parts
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
EUPZ-08 Filter monitor installation
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EUQA Humidifier maintenenace
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EURA Rotary heat exchanger maintenance
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
EURA Rotary Spare parts
Language: English
Status: Current
  • Spare parts
View | Download | |
.pdf
Express Build Catalogue
Language: English
Status: Current
  • Technical
View | Download | |
.pdf
JM Aerofoil Marine Marketing Brochure
Language: English
Status: Current
  • Marketing
View | Download | |
.pdf
JM_Aerofoil_Bifurcated_Technical_EN.pdf
Language: English
Status: Current
  • Technical
View | Download | |
.pdf
RDAS_Technical Catalogue
Language: English
Status: Current
  • Technical
View | Download | |
.pdf
Smoke Master SMHA Hatch Installation instructions.
Language: English
Status: Current
  • Installation
  • Operation
  • Maintenance
  • Commissioning
View | Download | |
.pdf
STEF-ATEX Declaration of conformity
Language: English
Status: Current
  • Declaration of conformity
View | Download | |
.pdf
UK Chillers Marketing Brochure
Language: English
Status: Current
  • Marketing
View | Download | |

5 Reasons to be partner with Fläkt Woods

5 REASONS TO BE PARTNER WITH FLÄKT WOODS Partner with Fläkt Woods - Fläkt Woods Group The five most important advantages to be partner with Fläkt Wo...

Learn more

AHU manufacturers

AHU manufacturers Lorem ipsum dolor sit amet, clita congue fastidii cu vel, pro id munere aliquid. Mei id brute tempor persius. Id eos clita quaerend...

Learn more

AIR HANDLING IN EXPLOSIVE ENVIRONMENTS

Ex – AIR HANDLING IN EXPLOSIVE ENVIRONMENTS Fläkt Woods has many years’ of experience manufacturing Air Handling Units for use in explosive environme...

Learn more

Akershus University Hospital, Norway

Energy Efficient Air Handling Units to Akershus University Hospital in Norway Fläkt Woods has delivered energy efficient air handling units worth €2....

Learn more

Applications

APPLICATION SOLUTIONS FOR DIFFERENT INDUSTRIES AND SEGMENT Disregarding of which building you visit throughout the world it often contains ventilatio...

Learn more

Callaway Gardens, USA

Callaway Gardens Resort Controls Humidity with High-Efficiency Ventilation System "The Pinnacles solved our problem by providing energy savings and g...

Learn more

CAR PARKS

Challenge: Enclosed and underground car parks are in need of ventilation to prevent the dangerous build-up of pollutants or mitigate the risks of smo...

Learn more

COMPARTMENTATION

Compartmentation - Fläkt Woods Group Maintain life-safety compartmentation during a fire with rapid response Fire Dampers Challenge: Different fire...

Learn more

ENERGY RECOVERY WHEELS

ENERGY RECOVERY WHEELS Energy recovery for all applications. ENERGY RECOVERY WHEELS...

Learn more

EPBD

Energy performance of buildings directive (EPBD) Fläkt Woods welcomes proposed recast of the EPBD as it supports our strategy EPBD Facts Issued by t...

Learn more

Fire Safety Solutions

FIRE SAFETY SOLUTIONS Fläkt Woods is a pioneer in indoor air management in case of fire or air pollution. We have built up vast applicational knowled...

Learn more

Floyd Medical Centre, USA

Floyd Medical Center Opts for the PINNACLE of Surgical Environments The unyielding demands for accurate dew point, humidity, and temperature control ...

Learn more

Fore Street, UK

Fläkt Woods make a splash with fore street pool refurbishment As part of a fast-track refurbishment and modernisation scheme at the Fore Street Swimm...

Learn more

Gina Tricot, Sweden

Fläkt Woods supplies eQ air handling units and IQCA chilled beams to Gina Tricot's new headquarters Gina Tricot is a success story in the Swedish ret...

Learn more

GREEN BUILDINGS

VENTILATION SOLUTIONS FOR GREEN BUILDINGS We see a constantly increased ambition among our customers to certify their buildings according to environm...

Learn more

Hybrid Operating Theater, Sweden

Hybrid Operating Theater on ”Höglandssjukhuset”, Eksjö, Sweden In 2012 Fläkt Woods were proud to deliver the DIF-OT ceiling filter system and air han...

Learn more

Ice Dome in Düsseldorf, Germany

High efficiency ventilation solutions for the Ice Dome in Düsseldorf Fläkt Wods has supplied the complete ventilation requirements for one of Europe'...

Learn more

LEGISLATION

Legislation Legislation from different local or international authorities affects Fläkt Woods as a supplier of products and solutions to an internati...

Learn more

LG Twin Towers, Korea

Greatest performance from Fläkt Woods in South Korea When the LG Group, one of the world's largest electronic conglomerates, needed to refurbish the ...

Learn more

Northcliffe House, London, UK

£90,000 OF SAVINGS MAKING HEADLINE NEWS When the CSR Board of DMG Media wanted to reduce energy usage and improve the reliability of the ageing venti...

Learn more

Ocean Towers, USA

Florida resort invests wisely in the Pinnacle® of Dehumidification, Ventilation & Energy Recovery There are two schools of thought when it comes to s...

Learn more

Old Trafford Stadium, UK

Energy efficient and cost effective air handling for Manchester United’s Old Trafford Stadium Fläkt Woods has supplied 19 of its EU air handling unit...

Learn more

PHARMA INDUSTRY

VENTILATION SOLUTIONS FOR PHARMACEUTICAL INDUSTRY The manufacturing process of pharmaceuticals serves one main purpose – to ensure that the patient i...

Learn more

Schering-Plough, Singapore

Total air handling solutions for Schering-Plough in Singapore Fläkt Woods has delivered the fans for one of its largest ever contracts, a £3.5 millio...

Learn more

Selection Tools

Selection Tools - Fläkt Woods Group Rapid product selection. Fläkt Woods computer-aided selection tools offer rapid product selection to specific pro...

Learn more

Skanska Entré Lindhagen, Sweden

Fläkt Woods provides ventilation equipment for Skanska's new head office Entré Lindhagen When Entré Lindhagen is completed, it will be one of Scandin...

Learn more

Spira Culture Building, Sweden

Fläkt Woods Provides Energy Efficient System Solution for Spira in Jönköping, Sweden From one year from now, the new culture building "Spira" in Jönk...

Learn more

SUB PAGE ?

SUB PAGE ? Lorem ipsum dolor sit amet, clita congue fastidii cu vel, pro id munere aliquid. Mei id brute tempor persius. Id eos clita quaerendum repr...

Learn more

Support Centre

Support centre Support Centre - Fläkt Woods Group In our Support Centre you will find our document library, selection tools, contact information and...

Learn more

Total/AKPO, Nigeria

ATEX Air Handling Units specified for Nigerian Platform Fläkt Woods has won an order to supply 26 ATEX certified EU air handling units for a new floa...

Learn more

Air Comfort Solutions

Learn more

AIR FLOW

Learn more

AIR HUMIDITY

Learn more

AIR QUALITY

Learn more

AIR TEMPERATURE

Learn more

CAR PARKS

Learn more

CELLULAR OFFICES

Learn more

CleanVent® Avalon® COATING

A new soil repellent coating for HVAC products has been developed by Fläkt Woods, in co-operation with VTT Technical Research Centre of Finland and Millidyne Oy. Our new CleanVent technology keeps the valves clean!

A new soil repellent coating for HVAC products has been developed by Fläkt Woods, in co-operation with VTT Technical Research Centre of Finland and Millidyne Oy. Our new CleanVent technology keeps the valves clean!

Learn more

CO2 CONTROL

Learn more

COMPARTMENTATION

Maintain life-safety compartmentation during a fire with rapid response Fire Dampers

Maintain life-safety compartmentation during a fire with rapid response Fire Dampers

Learn more

CONFERENCE ROOMS

Learn more

DRAUGHT FREE

Learn more

ENERGY EFFICIENCY

CHALLENGE: TO DECREASE ENERGY CONSUMPTION IN BUILDINGS.
SOLUTION: ENERGY EFFICIENT VENTILATION SOLUTIONS.

CHALLENGE: TO DECREASE ENERGY CONSUMPTION IN BUILDINGS.
SOLUTION: ENERGY EFFICIENT VENTILATION SOLUTIONS.

Learn more

eQ MASTER WITH TWIN WHEEL

Learn more

eQ PRIME WITH REGASORP WHEEL

Learn more

FILTERING

Learn more

OPEN PLAN OFFICE

Learn more

OPERATING THEATRE

Clean hospitals rely on well designed HVAC systems. 

Clean hospitals rely on well designed HVAC systems. 

Learn more

PEOPLE & PROPERTY PROTECTION

Learn more

PINNACLE SYSTEM

Learn more

POLLUTION CONTROL

Learn more

PRESSURISATION SYSTEM

Learn more

SMOKE EXTRACT SYSTEM

 

 

Learn more
Send files (0)
Tick the box next to the documents you want to send