Product Selection Tools


ACON offers rapid selection of Air Handling Units to specific project requirement and provides you with all the technical information you will need such as:

  • Energy and Life Cycle Costs calculations
  • Product Dimensions
  • Updated Documentations for the individual Air Handling Units
  • BIM integration and CAD export to the most frequent file types.


Go to ACON>>

ExSelAir® for Air Diffusion

ExSelAir® is Fläkt Woods’ selection tool for Air diffusion: Air Terminal Devices, Attenuators, Chilled Beams, Fan coils, Fire Safety. In ExSelAir® you will find:

  • 3D-models of all products
  • 3D-presentations of flow patterns
  • Product performance calculations
  • Product dimensioning in a room
  • Technical catalogues along with directions for installation, adjustment and maintenance
  • BIM integration to the most frequent file types.
  • MagiCAD integration through plugins (see below).


Go to ExSelAir>>


The Fläkt Woods Fan Selector software allows a wide range of fan related products to be selected and configured from axial and centrifugal fans to box and HRU products.

  • Aerodynamic duty based selections with comprehensive technical details
  • Product configuration & performance modelling
  • Full range of controls and accessories
  • Operating energy profiling and cost calculations
  • BIM & REVIT integration

Go to FanSelector>>

Centriware Fan Selection PROGRAM

Products in the program:
  • CentriflowPlus plug fan range covers air flow up to 25 m3/s and pressure rise up to 3000 Pa. The fan impeller has backward curved blades and the fan range covers also high-pressure and ATEX versions.
  • CENTRIMASTER GT-range consists of single and double-inlet centrifugal fan sets for air flow up to 50 3m/s and pressure rise up to 3300 Pa.
  • CENTRIMASTER GX double-inlet bare shaft fan range covers air flow up to 50 m3/s and pressure rise up to 3300 Pa.
  • ROOFMASTER range with roof fans covers air flow up to 5 m3/s and pressure rise up to 650 Pa.
  • GLEB Kitchen exhaust fans are available in F400 version (400°C for 2 hours) and cover air flow up to 2,7 m3/s and pressure rise up to 1100 Pa.
New in September 2015!
CentriFlow 3D new plug fan with unique mix flow impeller design delivers superior performance inside your air handling unit. Air flow range from 200 to 60000 m3/h.


Centriware download>>

Plugins for MagiCAD

MagiCAD offers possibilities to have plugins to enable a user to connect and import product selections and calculations and thereby selections becomes faster, easier and more accurate.

The plugin enables the users to find Air terminal devices, Chilled beams and Air handling units. The plugins are available for AutoCad and Revit.

Via MagiCAD plugins offer Fläkt Woods an opportunity to make it easier and more productive for designers to choose among our products. The Plugin is available for all MagiCAD users worldwide and free of charge.


Go to MagiCAD>>



Activent is a ventilation system for supplying and distributing air. Small air jets from the ducts mix with room air through induction. Under temperature air can be supplied without causing draughts. 
(Please note that it is only available for 32 bit operating systems).

Activent download>>


e-Cad is an application that is used to import Fläkt Woods’s air handling units into AutoCAD drawings or to export DXF files from Acon.

e-CAD download>>